Screened Fill is dirt that has been screened so there are no rocks in the finished product. Screened Fill is ideal for leveling your lawn or yard in addition to filling any holes or areas in your yard. A 4-6 inch layer of topsoil is typically applied after using screen fill.

What is screened fill sand?

A good compacting dirt, screened to 1/4″ minus. It works well for foundation drainage, filling in tree roots, filling holes, retaining walls, to build up a driveway or parking area base and many other home and ranch applications.

Is sand better than fill dirt?

Dirt is great for creating solid, unmovable foundations in dry places, but it tends to absorb and retain moisture when used in wet areas. Wet environments are where sand truly excels. … Sand is often used for fill material in and around ponds, septic tanks, and other damp areas.

What is clean fill dirt used for?

Unsourced material may be challenged and removed. Fill dirt (also called cleanfill, or just fill) is earthy material which is used to fill in a depression or hole in the ground or create mounds or otherwise artificially change the grade or elevation of real property.

What is filling sand used for?

Consists of: An unscreened and unwashed sand commonly known as Fill Sand or Cable Sand. Fill Sand is ideal for trench backfill as well as a bedding layer when using membranes or as a blinding layer prior to pouring concrete.

Is concrete clean fill?

While each local and state municipality has their own agreed upon definition of clean fill, it generally is thought of as uncontaminated solid material including soil, rock, stone, dredged material, used asphalt, and brick, block or concrete from construction and demolition activities.

What is the best type of fill dirt?

Fill dirt with more than a 50 percent sand content is considered perfect for filling areas intended for plants. Topsoil needs to be added to provide nutrients for plants but not for drainage purposes; 6 to 12 inches of topsoil is sufficient.

Can you grow grass on fill dirt?

While turf grass will grow in fill dirt, it generally won’t thrive. Fill is a construction material and should be free of organics, as it’s mined from the ground under the topsoil. Fill is great to “fill” up low spots in the ground, but doesn’t have the decomposed matter that makes topsoil so great for grass.

What kind of dirt do you use to level a yard?

There are two main choices for a lawn leveling top dressing: sand or a sand-soil mix. For leveling purposes, pure sand is the quickest and easiest. Sand provides excellent structure and leveling properties, will help with drainage, and can cling to the clay in the soil.

What is the best backfill material?

1. SCREENINGS. Screenings, otherwise known as FA5 or limestone screenings, are a great choice for backfill because it compacts well. …
2. TRENCH BACKFILL (TBF) …
3. CA7 BEDDING STONE. …
4. CA6/CM06/GRADE 8. …
5. 3″ STONE.

Article first time published on

How much does fill cost?

MaterialCost Per Cubic YardFill Dirt$5 – $25Screened Loam$18 – $26Sand$15 – $50Compost$20 – $50

What is common fill?

Common Fill is terminology used to describe any fill material that does not require a certain specification to be met. Common Fill will most generally be delivered as a clay type material. However, the range of consistencies, color, and other characteristics can vary from location to location.

What's the difference between fill dirt and topsoil?

Fill dirt consists of a mixture of broken down rocks, sand and clay. It contains little fertility for plants to grow, or any organic matter. … Topsoil contains organic matter and is likely to shift or settle over time. If you are looking for filler then fill dirt will provide a more stable material.

Which sand is best for filling?

For optimal performance, grits sand is the best material for this application. Grits sand compacts well and will ensure the pavers do not re-settle. Grits sand is also economical, so it can also be used in place of torpedo sand for backfill and trench fill projects.

How do you build low land?

If your land has only a few low spots in it, adding some fill dirt is a quick and easy fix. Use a lawn-leveling mix from your local garden center or mix sand with garden soil at a 1-to-1 ratio. Load up a wheelbarrow with the fill dirt mixture and shovel a 1/2-inch layer into the depressions.

What is hard fill?

Basecourse or hard fill is a crushed graded metal and contains fines. Basecourse or Hard Fill is used primarily as a bedding base for a wide range of applications and often referred to as “Gap” and is short for “general all passing”, and contains all chip sizes up to a nominal stated size.

What is rough fill?

Rough Fill. Same as Clean Fill, with 5% or more clumps or rocks or sod or roots or weeds, or concrete chunks, etc. Also gumbo clay and marsh bottom.

What is dirty fill?

Clean fill dirt is generally defined as a soil mixture (which often contains rock, used pavement, and other aggregates) that is free of pollution, contamination, or hazardous substances.

How do I build low spots in my lawn?

Filling Low Spots in the Lawn You can easily make your own lawn patching soil by mixing sand and dry topsoil in equal parts of half-and-half, spreading the leveling mix into low-lying areas of the lawn. Some people also use compost, which is great for enriching the soil.

How do I fix bare spots in my lawn?

1. Rake the Area. Rake and remove any debris or dead grass from the area, using a garden rake. …
2. Loosen the Soil. Break up the soil with a hard-toothed lawn rake or a garden cultivator. …
3. Amend the Soil. …
4. Spread the Seeds. …
5. Rake the Seeds. …
6. Begin Watering. …
7. Mow When Ready.

How much does it cost to level a yard?

Average Cost to Regrade a YardNational average cost$1,300Average range$700-$1,700Minimum cost$400Maximum cost$5,000

What do you put under sod?

Typical starter fertilizer recommendations are (N-P-K) of 10-10-10 or 19-19-19. Lightly incorporate this starter fertilizer into the top 2-3 inches of topsoil to avoid root injury. Lightly tamp or roll the topsoil to settle the surface and create an ideal surface for installing the sod.

How do I soften hard soil in my lawn?

Core aeration is considered the best and most effective way of loosening your compact soil. Other methods of aeration, such as spiking, don’t remove any soil from your lawn, so they can actually make your compaction issue worse. During core aeration, tiny plugs or cores are pulled up throughout your yard.

Is sand good for backfilling?

While both materials can be used for backfilling, PG&E sand is more suitable for backfilling utility line trenches. The reason is that it doesn’t shrink or swell as condition changes, and is easier to dig up when maintenance is required. Both fill sand and fill dirt are commonly used in building and landscape projects.

What is the difference between a fill and a backfill?

A fill refers to the product addition needed to the new growth area against the cuticle. We recommend a fill every two to three weeks. A backfill is the repositioning of the white free edge, if you wear pink and white enhancements.

What are the types of backfill?

• Course Grained Soil. …
• Fine-Graded Soils Of Low To Medium Plasticity. …
• Commercial By-Products. …
• CLSM (Controlled low strength material)

How is fill dirt measured?

Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 27 (the amount of cubic feet in a yard). The final figure will be the estimated amount of cubic yards required.

How many yards are in a ton of dirt?

How much is a ton of soil? A ton of condensed soil is typically about 0.750 cubic yards (3/4 cu yd), or 20 cubic feet.

What is a fill material?

Fill material is an earth-based material commonly used throughout development and construction projects to fill in a hole or depression in the ground. While fill material can be used to ‘fill’, it can also be used to expand, with other applications being inclusive of artificial mound, grade, and elevation development.

Is fill dirt bad?

The bad news? Fill dirt provides little fertility for plant life. Fill dirt can still be purchased at your local landscaping supply location, but it’s hardly the type of soil you want to plant things in. Rather, it should be used to fill depressions and shape the surface of your garden or lawn.

What is structural fill dirt?

Structural fill is a screened earthen material used to create a strong and stable base. For example, the native soil at a site may be too weak to support a structure, so the soil is replaced by compacted structural fill to provide the needed structural support.