XHHW-2, or XLPE High Heat-Resistant Water-Resistant, Wire is a general-purpose wire suitable for use in conduit, raceways, feeders, and branch circuits. It is also often found in power distribution systems in industrial, commercial, and residential buildings. It features XLPE (Cross-linked Polyethylene) insulation.

What does the 2 stand for in Rhw 2?

RHW-2/USE-2 600v and 2KV It can be solid or stranded, bare or tinned annealed copper, designed to operate up to 90°C and up to 600 V in dry and wet environments (the ‘-2’ designation indicates the ‘upgraded’ version of plain old USE/RHW, which can operate up to 90°C in dry environments, but only 75°C in wet ones).

What is XHHW rated for?

XHHW-2 is rated up to 90° C in both wet and dry environments. THHN is rated up to 90° C in dry environments only. Dual-rated THHN/THWN carries a 75° C wet-environment rating. The 0.004” nylon jacket on the THHN is hydroscopic (that is, it absorbs moisture), which prohibits its use in wet locations at any temperature.

What is RHH RHW wire?

RHW wires are an underground service entrance cable for direct burial in which the conductor temperature will not exceed 90 degrees Celsius wet or dry. RHW-2/USE-2 and RHH cables have a voltage rating of 600 volts and are high-heat, moisture, and sunlight resistant.

What is the difference between XHHW and XHHW-2?

THHN/THWN-2:XHHW-2:T = ThermoplasticX = Cross-Linked Polyethylene (XLPE)HH = High Heat ResistantHH = High Heat ResistantW = Water ResistantW = Water ResistantN = Nylon Jacket(Not Required)

What is use-2 wire used for?

USE-2 cable stands for Underground Service Entrance cable. USE-2 cable can be used underground since it is able withstand pressure and is resistant to other elements such as sunlight (black only), oil and gas.

Is XHHW-2 rated for direct burial?

1 Type XHHW/XHHW-2 cable shall not be used in direct burial applications.

What is Al MHF use-2 cable?

Aluminum Mobile Home Feeder cable has a type USE2/RHH/RHW-2 cross linked polyethylene (XLP) insulation. The conductors are cabled together with a green XLP insulted aluminum ground. The grounded (neutral) conductor is identified by a longitudinal white stripe.

What does Rhw stand for?

AcronymDefinitionRHWReciprocal of Homogeneous WRHWRural Health Works (Stillwater, OK)RHWRobert Hewitt Wolfe (famous television writer)RHWRight Hand Woman

Can use-2 wire be in conduit?

USE-2/RHH/RHW-2 aluminum building wire is rated for direct burial and intended for general purpose applications utilized in conduit, underground in conduit, or other recognized raceways for services, feeders, and branch-circuit wiring.

Article first time published on

What is 600 mcm rated for?

SizeTemperature Rating of Copper Conductor(AWG or kcmil)60°C (140°F)90°C (194°F)600 KCMIL350475700 KCMIL385520750 KCMIL400535

Can XLPE cable be buried?

Suitable for direct burial. Used for secondary distribution and underground service at 600 V or less. May be used in ducts or direct burial.

What is the diameter of #2 aluminum wire?

AWGDiam. (mils)Pounds/1000ft225861.0322948.4420438.4518230.4

Is XHHW-2 rated for 1000v?

Type XHHW-2 is permitted to be used in wet or dry locations at temperatures not to exceed 90°C. Type XHHW-2 is permitted for 600-volt and 1000-volt applications. Suitable for applications requiring low-leaking circuits and a dielectric constant of 3.5 or less.

Why would you use type XHHW-2 over Type XHH wire?

XHHW-2 is approved for use up to 600V and is UL Listed for 90° C (194° F), in both dry and wet locations. The previous generation of XHHW had a lower temperature rating, approved up to 75° C in wet environments, making the next generation XHHW-2 wire a more useful and an ‘all environment’-type product.

What does XHHW wire stand for?

XHHW Wire Overview XHHW is an alphabetism or initialism which stands for “XLPE (cross-linked polyethylene) High Heat-resistant Water-resistant.” XHHW is a designation for a specific insulation material, temperature rating, and condition of use (suitable for wet locations) for electrical wire and cable.

Is Romex a Thhn?

Romex wire is made out of two or three THHN wires combined with a grounding bare copper wire. Like the THHN wires, Romex wire can’t be used outside because of its minimal PVC jacket protection.

Can you bury THWN?

THHN wire can be used in a conduit but is not rated for direct burial alone.

Can bare copper wire be buried?

Conductors that are directly buried must be identified for that use as stated in 310.10(F). In general wire type equipment grounding conductors can be bare, covered or insulated as stated in 250.118(1). … Bare copper conductors are also used as grounding electrodes in 250.52(A)(3) and 250.52(A)(4).

Can you bury Soow cable?

Since it is subject to physical damage, it is not allowed as a direct burial. UF cable is used for direct burial. “SOOW” cord is not rated for direct burial on the exterior insulation.

Can you bury aluminum wire?

Types of Direct Burial Cables Common types of cables with a copper conductor suitable for direct burial are USE-2, UF-B Underground Feeder Cable, and Tracer Wire. Aluminum URD Direct Burial Wire is the most commonly used direct burial aluminum wire.

What does Class 2 wiring mean?

Class 2 In-Wall Rated Wire provides an extra layer of installation that is more resistant to cracking or melting, and is approved by the NEC to be installed inside walls. Lighting. As we mentioned earlier, all low-voltage lighting fixtures must be certified by an NRTL to pass inspection.

What is XLPE wire?

What is XLPE? Also known as Cross-linked Polyethylene, XLPE is a very good insulation in terms of electrical properties. XLPE has very high insulation resistance, a stable dielectric constant over all frequencies, and a low dielectric constant.

What is #2 aluminum wire?

#2 Stranded Aluminum XHHW-2 Wire XHHW-2 are primarily used in air duct, conduit or recognized raceways for services, feeders and branch circuit wiring as specified in the National Electrical Code.

What does URD stand for in electrical wire?

Underground residential distribution wire (URD) is a specialty aluminum wire intended for use in residential construction and light to medium duty commercial applications.

What size wire do I need for 100 amps?

When it comes to the lines connecting master and secondary panels, where the line will carry as much as a full 100 amps, use a 2-gauge non-metallic sheathed electrical cable. The cable must contain one or two hot wires depending on your needs, one neutral wire, and one ground wire. Each wire should be 2-gauge in size.

Can use-2 be used indoors?

USE-2/RHH-2/RHW-2 can be direct buried, but otherwise requires a raceway. This, practically, limits single-rated USE-2 wires and cables to direct burial applications, or use as a multiplex cable-in-conduit outdoors. (You can’t use it indoors or for general aboveground work, even when in a raceway!)

What is photovoltaic wire?

Photovoltaic wire, also known as PV wire, is a single-conductor wire used to connect the panels of a photovoltaic electric energy system. PV systems, or solar panels, are electric-power production systems that capture sunlight in order to produce electricity through an energy conversion process.

Can underground cable be used indoors?

The most common types of direct burial cable used in residential projects are underground service entrance (USE) and underground feeder (UF). … While standard NM cable is rated only for dry, interior applications, UF cable can be used outdoors as well as indoors.

How many amps will 2 0 wire carry?

Wire Size75°C (167°F)AWG(mm²)Copper2/0(67.4)1753/0(85.0)2004/0(107.2)230

How many amps can 18 AWG handle?

A conservative estimate for several feet of 18 gauge wire is 16 Amps. If you have only 12 gauge wire, the 18 gauge wire can handle more than 16 Amps.