Dewalt DW745 and DeWalt DWE7480 are table saw. But the DeWalt DWE7480 is a discontinued model of DeWalt. The new version is DW745.

What replaced the DWE7480?

Amazon says that the DWE7480 is discontinued and that the DWE7485 is “a newer model of this item.” Although Amazon doesn’t have it in stock yet, Home depot has quite a few of the new saws in stock at local stores.

Does DeWalt make a full size table saw?

DEWALT 10-Inch Table Saw, 32-1/2-Inch Rip Capacity (DWE7491RS)

What does DCS stand for DeWalt?

DCS stands for DeWalt Cordless Saw, so if you see that before the model number, you’ll know it’s a portable, battery-powered saw.

How deep will a Dewalt table saw cut?

10″ (254mm) Dewalt table saws can cut up to 3-⅛” (79.4mm) deep at 90 degrees and a maximum of 2-¼” (57.15mm) deep at 45 degrees.

What is the difference between DW745 and DWE7480?

For instance, the DW745 is lighter, cheaper, and a little better in terms of the overall warranty. The DWE7480 is more powerful and offers a greater rip capacity for larger workpieces. Both models are popular among their respective users.

Is Dewalt table saw any good?

The DEWALT DWE7491RS is the best job site table saw I‘ve ever used. I say that in large part because the saw has great power, largest rip capacity on the market, and the best mobile stand that I’ve used. The DWE7491RS is also extremely accurate and very well built.

Why is DWE7480 discontinued?

10 inch saws in this format are being discontinued due to regulatory requirements. All the new portable table saws are 8 inch.

What saw blade comes with DWE7480?

Model Number:DWE7480Dust Port Diameter:Warranty:3 Year Limited WarrantyMax Rip to Left of Blade:Cutting Diameter:10″Max Rip to Right of Blade:Blade Type:24T CarbideTool Dimensions:Arbor Size:5/8″Tool Weight:

What does XJ mean in Dewalt?

The -XJ is only our internal code for ordering a bare unit. There is no difference in the actual tool. So, the dealer was correct.

Article first time published on

What does Dewalt DCD mean?

Broadly speaking, your DEWALT drills will fall into three categories, light, medium and heavyweight. … DCD stands for DEWALT Cordless Drill, and here’s a selection of the best non-corded products they have to offer.

What does DCK mean Dewalt?

Dcd(stands for Dewalt cordless drill) then you have Dcs (Dewalt cordless saw) Dck (Dewalt cordless kit.

Can I use a dado blade on my Dewalt table saw?

The DEWALT DWE7402DI Dado Throatplate for 10″ Portable Table Saw allows for use of stacked dado cutters. This insert is designed to be used with DWE7490 and DWE7491 Table saw versions .

Does Dewalt make a 10-inch table saw?

The DEWALT versatile 10-Inch Jobsite Table Saw features the Site-Pro Modular Guarding System for application-specific setups that result in quick, accurate cuts. … This saw comes with blade guards, a miter gauge, a push stick, and a dependable 10-inch, 24-tooth carbide blade to get your project started right away.

What blade comes with Dewalt DWE7491RS?

The DWE7491RS comes with a 10-inch, 24-tooth carbide saw blade as standard.

How many amps does a DeWALT table saw use?

Power for the DeWalt DW745 table saw comes from a 15 Amp motor, spinning at 3,850 RPM. This is a corded tool, so your typical 110V outlet is required. The business end of the motor connects to a 10-inch blade, which delivers a 3-1/8” max cutting depth, at 90°.

What thickness of wood can a table saw cut?

Cutting Depth and Blade Size The blade is adjustable, so you can make a shallow cut just a fraction of an inch deep, as well as deeper cuts. With a 10-inch table saw, you can make a maximum cut up to 3.5-inches deep, and with a 12-inch table saw, you can cut up to 4-inches deep.

How thick can 8 table saw?

The 8-inch blade will probably only be able to cut about 3 inches deep, but it will be able to complete more revolutions per minute, sawing through materials with great alacrity.

What is the horsepower of DeWalt dwe7491rs?

Amperage Rating15 ABrand NameDeWALT®Cutting Capacity Rip Right32-1/2 inDimensions12-3/4 in H x 26-1/2 in W x 26-3/4 in DHorsepower2 hp

Where are DeWalt table saws made?

Where Are The DeWalt Manufacturing Facilities In The United States? DeWalt currently has manufacturing plants in Maryland, North Carolina, South Carolina, Tennessee, Kentucky, and Connecticut.

What is Rip capacity on a table saw?

Rip capacity is basically defined as the amount of space between the edge of the table saw’s blade and the edge of the fence.

What is Site Pro modular guarding system?

From DeWalt site: Site-Pro Modular Guarding System allows for tool free adjustments of the guarding components appropriate for each application. Basically, fancy name for plastic blade guard. … The only guard is the plastic blade guard. It has been upgraded from the old guard that is obsolete.

Can you use dado on dwe7480?

It seems the widest dado you can get on this class of saws in the 13/16″. … This is pretty standard for saws portable table saws.

Can you use a dado stack on DeWALT table saw?

As you can see on DeWALT’s FAQ section for the model itself, they state that “No similar to our other compact table saws (DWE7485 and DW745) the unit does not accept DADO stacks.” This is also addressed in the Instruction Manual supplied with the table saw, on page 15 under “Saw Blades,” adding that personal injury may …

What is a table saw dado blade?

A dado blade is a circular saw blade that cuts grooves into the wood that are much wider than traditional saw blade cuts. They are used for interlocking applications. … You can use other methods to achieve the wide groove cut without a dado blade, including using a clamp guide with a handheld router or miter saws.

What does XR mean on Dewalt drills?

But what does XR mean on Dewalt? Dewalt XR was introduced back in 2011 and stands for extreme runtime. You can expect long lasting power with these top of the range tools. Dewalt are one of the most popular power tool brands known to man. They offer both corded and cordless tools of the best quality and standards.

Is Dewalt phasing out 18V?

It’s official – Dewalt announced today that their 18V NiCad cordless power tool system will be discontinued, and they expect for remaining NiCad batteries to be phased out by March 2022.

What is the difference between Dewalt XR and regular?

The difference between the the is that the XR is more powerfull than the regular 20V. The batteies are are made to fit both the 20V max and the 20 XR. The only difference in batteries is the amount of Amps. … The 3.0 Amps just lasts longer, but for the rest they can be both used for the Dewalt.

How much torque do you need in a drill?

Newton Metres (Nm) on drills: 4 to 15Nm is fine for all of those smaller screw driver tasks around the home. 15 to 35Nm is a great all-rounder to drill and drive medium sizes screws and hole drilling. 35Nm upward will tackle all of those more serious project with bigger screws and holes.

What is the difference between hard and soft torque?

So, the difference between hard torque and soft torque is this: Hard torque is how much the driver will produce when you’re working with hardened fasteners and materials like stainless steel. Soft torque is the maximum torque you get when you’re working with softer materials, like pine.

What do numbers on Dewalt drill mean?

In simple words, the numbers on your drill refer to how much torque will be applied to a fastener such as a screw. Once that particular torque level is reached, the power drill will stop driving the fastener or turning at all.