vPC (Virtual Port-Channel), also known as multichassis EtherChannel (MEC) is a feature on the Cisco Nexus switches that provides the ability to configure a Port-Channel across multiple switches (i.e. vPC peers). vPC is similar to Virtual Switch System (VSS) on the Catalyst 6500s.

How does Cisco VSS work?

The Virtual Switching System (VSS) allows two Cisco Catalyst 6500 or 4500 chassis to bond together so that is seen as a single virtual swich to the rest of the network. … Configure a virtual switch domain on both switches and configure one switch as “switch 1” and the other one as “switch 2”.

What is VSS in Catalyst switch?

The Cisco Catalyst 6500 Series Virtual Switching System (VSS) allows the clustering of two or more physical chassis together into a single, logical entity. This technology allows for enhancements in all areas of network design, including high availability, scalability, management, and maintenance.

What is the difference between VSS and stacking?

The VSS also simplifies the Layer 3 network topology because the VSS reduces the number of routing peers in the network. Stack Switching: Stack Switching is the concept of stacking the various switching via stack cables so that they can act like a single switch with various ports.

What is vPC in data center?

Virtual Private Cloud(VPC)- Data Center in the Cloud. … A VPC is an isolated block of a provider’s infrastructure forming a customer’s unique data centre. It can be logically considered as the customer’s own conglomeration of servers, routers, network cards and cables in the cloud.

What is the benefit of VSS?

VSS increases operational efficiency by simplifying the network, reducing switch management overhead by at least 50 percent. – Single configuration file and node to manage. Removes the need to configure redundant switches twice with identical policies.

How do I know if my Nexus is vPC?

The peer link exchanges state information and carries control traffic between peer nexus switches. To verify, use need to use, “show vpc brief” command. Member Ports: Member ports are the ports where end device is connected.

What is a VSS port?

∎ [Streaming Port Settings] The VSS port enables GV-IP Camera, GV-Video Server or GV-Compact DVR to be connected to GV-System. The default setting is 10000.

What is SSO in VSS?

Short answer. SSO = Stateful switchover , establish a relation of active / passive between 2 supervisor engines in a chassis to provide uninterrupted L2 functionality in case of a hardware failure.

How many switches can be used in VSS?

You can have stack upto 9 switches via stack cabling, while in the Cisco VSS, only two switches can be the part of VSS.

Article first time published on

What is SUP in Cisco switch?

The supervisor engine is the central forwading intelligence of a modular switch such as the 4500 and 6500 series, and also takes care of the control plane and other functions. Think of it as the “brains” of your switch.

What is Cisco VSL?

VSL is used to carry on proprietary encapsulated frames also control plane messages to form a single device, one supervisor the active one controls both chassis with second supervisor acting as hot standby as in a single chassis with two supervisors.

Is VSS active active?

–> A Virtual Switching System is formed by using a VSL (virtual switch link) between both switches of 4500 or 6500 series. –> In VSS, one switch acts as Active Switch and other as Standby Switch.

How can I see my VSS status?

1. Open a command window. …
2. At the command prompt, type vssadmin list providers, and then press ENTER.
3. Confirm that Microsoft VSS provider is listed as: …
4. Type vssadmin list writers at the command prompt, and then press ENTER.
5. Confirm that all the VSS writers are showing:

How do I view Cisco VSS?

Verification. 1) To displays the virtual switch domain number, and the switch number and role for each of the switches you can use “show switch virtual” command. 3) To displays the role, switch number, and priority for each of the switch in the VSS use “show switch virtual role” command.

Why do we need VPC?

Q: Why should I use Amazon VPC? Amazon VPC enables you to build a virtual network in the AWS cloud – no VPNs, hardware, or physical datacenters required. You can define your own network space, and control how your network and the Amazon EC2 resources inside your network are exposed to the Internet.

Is VPC IaaS or PAAS?

VPC infrastructure is our new IaaS platform, based on software-defined networking and ideal for cloud-native applications.

What is VPC in simple words?

A virtual private cloud (VPC) is a virtual network dedicated to your AWS account. It is logically isolated from other virtual networks in the AWS Cloud. You can launch your AWS resources, such as Amazon EC2 instances, into your VPC. … A subnet is a range of IP addresses in your VPC.

How do I set up vPC?

1. Create a (VPC) Network. …
2. Create and Attach an Internet VPC Gateway. …
3. Create a Public Subnet. …
4. Create Security Group for NAT Server. …
5. Create a Custom Route Table. …
6. Create an Elastic IP Address for the NAT. …
7. Create and Launch a NAT Host Instance. …
8. Build Out the Rest of Your VPC.

What is vPC keep alive?

In particular, it helps the vPC switch to determine whether the peer link itself has failed or whether the vPC peer is down. No data or synchronization traffic is sent over the vPC Peer Keepalive Link—only IP/UDP packets on port 3200 to indicate that the originating switch is operating and running vPC.

What happens if vPC peer link fails?

vPC peer-link failure If peer-link fails, then all the member ports from vPC secondary node will be suspended. Here important to note, keep-alive is active in this scenario, which allowing nodes to exchange heartbeat.

Is VSS Cisco proprietary?

VSS (Virtual Switching System) is a Cisco proprietary technique to create a single logical switch out of two physical switches.

How many control planes are there in VSS?

FEATURESTACKINGVSSChassis membersScalable upto 8-9 members2 members at maxPlatform switches2960 , 3750 , 3650 , 38506500 , 6800 , 4500Control Plane1 Control Plane1 Control PlaneSwitch SizeOn smaller / Access layer switchesOn Core or Aggregation layer switches

What is Cisco StackWise virtual?

Cisco StackWise Virtual is a network system virtualization technology that pairs two switches into one virtual switch. This technology simplifies the operational efficiency because we can only control one plane to manage the stacking switches.

How do I configure HSRP?

1Enter privileged EXEC mode.R2>enable11Configure the use of HSRP preemption.R2(config-if)#standby preempt

What is redundancy force switchover?

Cisco IOS XE Everest 16.5.1a. Usage Guidelines. Use the redundancy force-switchover command to manually switch over to the redundant switch. The redundant switch becomes the new active switch that runs the Cisco IOS image, and the modules are reset to their default settings.

What is VRF in Cisco switch?

VRF stands for virtual routing and forwarding. When you create a vrf, you tell it what routes to import/export. Then you assign that vrf to an interface. Once the vrf is attached to an interface, the switch/router creates a separate routing table to hold those routes.

What is a virtual switching element?

A virtual switching system (VSS) combines a pair of switches into a single network element. For example, a VSS in the distribution layer of the network interacts with the access and core networks as if it were a single switch. … An access switch connects to both chassis of the VSS using one logical port channel.

What is switch stacking in networking?

In networking, the term “stack” (or stackable) refers to a group of physical switches that have been cabled and grouped in one single logical switch. … Having a single logical switch, with better reliability, makes it easy to translate the logical network topology in physical topology.

How do I set up VSS?

1. Open Windows Explorer or the Microsoft Management Console (MMC) Disk Management snap-in, then right-click the drive.
2. Select Properties from the context menu.
3. Select the Shadow Copies tab.
4. Under “Select a volume,” select the volume for which you want to enable Shadow Copies. …
5. Click Settings to configure VSS.

What is the benefit of StackWise virtual?

It is simple: The StackWise cables make it easy to virtualize two Cisco Catalyst switches into a single logical switch. It’s also easy to manage. It is scalable: The fully distributed architecture increases network bandwidth for improved user experience.