In anesthetic practice, this formula has been further simplified, with the hourly requirement referred to as the “4-2-1 rule” (4 mL/kg/hr for the first 10 kg of weight, 2 mL/kg/hr for the next 10 kg, and 1 mL/kg/hr for each kilogram thereafter.

How do you calculate fluid requirements?

1. For 0 – 10 kg = weight (kg) x 100 mL/kg/day.
2. For 10-20 kg = 1000 mL + [weight (kg) x 50 ml/kg/day]
3. For > 20 kg = 1500 mL + [weight (kg) x 20 ml/kg/day]

How do you calculate percentage of dehydration?

After clinical signs have been observed, the degree (%) of dehydration should be determined. This is calculated by dividing the difference between the pre-illness and illness weights by the pre-illness weight, then multiplying by 100 (Table 5). For example, a 10-kg patient who has lost 1 kg is 10% dehydrated.

How do you calculate pediatric fluid maintenance?

1. For infants 3.5 to 10 kg the daily fluid requirement is 100 mL/kg.
2. For children 11-20 kg the daily fluid requirement is 1000 mL + 50 mL/kg for every kg over 10.
3. For children >20 kg the daily fluid requirement is 1500 mL + 20 mL/kg for every kg over 20, up to a maximum of 2400 mL daily.

How do you calculate IV fluids for adults?

If you need to set this up on an IV infusion pump, use the formula, volume (mL) divided by time (min), multiplied by 60 min over 1 hour, this equals the IV flow rate in mL/hr. Using this formula, 100 mL divided by 30 min, times 60 min in 1 hr, equals 199.9, rounded to 200 mL/hr.

How do you calculate fluid resuscitation?

1. 4ml x TBSA (%) x body weight (kg);
2. 50% given in first eight hours;
3. 50% given in next 16 hours.

How do you calculate adult fluids?

1. 4 mL / kg / hour for the first 10kg of body mass.
2. 2 mL / kg / hour for the second 10kg of body mass (11kg – 20kg)
3. 1 mL / kg / hour for any kilogram of body mass above 20kg (> 20kg)

How do you calculate IV fluid intake?

1. 100 ml/kg/24-hours = 4 ml/kg/hr for the 1st 10 kg.
2. 50 ml/kg/24-hours = 2 ml/kg/hr for the 2nd 10 kg.
3. 20 ml/kg/24-hours = 1 ml/kg/hr for the remainder.

How do you calculate fluid intake for elderly?

A formula used to calculate fluid requirements for older people is: U 100 mL fluid per kg body weight for the first 10 kg U 50 mL fluid per kg for the next 10 kg U 15 mL fluid per kg for each kg after 20 kg.

What is maintenance fluid for pediatrics?

Maintenance fluids consist of water, glucose, sodium, and potassium. The glucose prevents starvation ketoacidosis and decreases the likelihood of hypoglycemia. Water, sodium and potassium protect the patient from dehydration and electrolyte disorders.

Article first time published on

How do you calculate IV fluids in a neonate?

Calculate routine maintenance IV fluid rates for term neonates according to their age, using the following as a guide: From birth to day 1: 50–60 ml/kg/day. Day 2: 70–80 ml/kg/day. Day 3: 80–100 ml/kg/day.

What does 5% dehydration mean?

Normal. Reduced. Severely reduced. When we talk of “5% dehydration”, it means that the child has lost an amount of fluid equal to 5% of the body weight. If you have an accurate pre-illness weight, you may use that weight.

How do you calculate 5% dehydrated?

1. For children with ≤5% dehydration, replace deficit in the first 24 hours.
2. For children with >5% dehydration, replace deficit more slowly.

What is the normal rate for normal saline?

Normal saline is 0.9% saline. This means that there is 0.9 G of salt (NaCl) per 100 ml of solution, or 9 G per liter.

How long does a 1000 mL drip take?

1000 ml of 0.9% Sodium Chloride should infuse in 5 hours.

What are the 3 main types of IV fluids?

• Isotonic Solutions. Isotonic solutions are IV fluids that have a similar concentration of dissolved particles as blood. …
• Hypotonic Solutions. Hypotonic solutions have a lower concentration of dissolved solutes than blood. …
• Hypertonic Solutions.

What is the normal intake and output of fluid?

In order to maintain the necessary balance of nutrients, oxygen and water, the adult body generally requires an intake of two to three litres per day, with approximately the same output (Bannerman 2018).

How is Tbsa calculated?

To calculate the %TBSA (quotient), it is necessary to divide the burned surface area (Burned BSA) (numerator in cm2) by the total body surface area (Total BSA) (denominator in cm2).

How much IV fluid is administered in the first 8 hours?

Four mL lactated ringers solution × percentage total body surface area (%TBSA) burned × patient’s weight in kilograms = total amount of fluid given in the first 24 hours. One-half of this fluid should be given in the first eight hours.

What does fluid resuscitation do?

The goals of fluid resuscitation include controlling bleeding, restoring lost blood volume, and regaining tissue perfusion and organ function.

What is the best method to monitor hydration status in the elderly?

Bioelectrical impedance analysis (BIA) is a measure of electrical impedance through the body, which can estimate total body water (TBW). The test, used routinely in US care homes, is non-invasive and has been promoted to assess hydration status.

What are the signs of dehydration in seniors?

• Feeling unquenchable thirst.
• Few or no tears.
• Dry, sticky mouth.
• Not urinating frequently.
• Dark-colored urine.
• Unexplained tiredness.
• Feeling dizzy or lightheaded.
• Confusion.

Does coffee count as water intake?

Juices and sports drinks are also hydrating — you can lower the sugar content by diluting them with water. Coffee and tea also count in your tally. Many used to believe that they were dehydrating, but that myth has been debunked. The diuretic effect does not offset hydration.

How do you record intake and output?

Record ice chips as fluid at approximately half their volume. Record the type and amount of all fluids the patient has lost and the route. Describe them as urine, liquid stool, vomitus, tube drainage (including from chest, closed wound drainage, and nasogastric tubes), and any fluid aspirated from a body cavity.

What do you use for maintenance fluids?

“Maintenance” = volume of fluid required to meet daily metabolic needs, such as normal water and electrolyte losses, and maintain homeostasis. Add dextrose if the patient has limited or no nutritional intake. 5% dextrose is appropriate for most patients included in this pathway.

How do you calculate fluid deficit in pediatrics DKA?

Weight>60kg35 ml/kg/24 hrs

Why maintaining fluid balance is critical in pediatric?

In children, maintaining adequate fluid intake and optimal hydration is essential for physiological and behavioral reasons. Water is the most abundant component of the human body. In newborns, who have developed in an aqueous milieu, body water content at birth is approximately 75% of body mass [1].

How do you calculate neonatal feed?

If your baby is fed every three hours, that equals eight feedings each day. Divide those 408 daily calories into eight feedings and you get 51 calories per feeding. Then divide the number of calories for each feeding by 20 to figure out how many ounces of milk your baby needs.

How much IV fluid is given for dehydration?

The fluid deficit in severe dehydration equals about 10% of body weight (i.e., 100 ml/kg). Infants should be given IV fluid at a rate of 30 ml/kg in the first hour, followed by 70 ml/kg in the next 5 hours, thus providing a total of 100 ml/kg in 6 hours.

What is the normal urine output for neonates and infants?

Generally, urine output (UO) < 1 mL/kg/h is accepted as oliguria in neonates, although it has not been systematically studied. pRIFLE criteria suggest UO cut-offs similar to those of the adult population (0.3 and 0.5 mL/kg/h).

What are the 10 signs of dehydration?

• Extreme thirst.
• Urinating less than usual.
• Headache.
• Dark-colored urine.
• Sluggishness and fatigue.
• Bad breath.
• Dry mouth.
• Sugar cravings.