SolarPly™ installs like traditional sheathing but it has a foil coating on one face which reduces up to 97% of the radiant heat transfer from the roof to the attic. This reduction can lower attic temperatures by up to 30 degrees and decrease an A/C system’s work load by up to 20%.

What is solar board?

Solar Board is Norbord’s OSB (Oriented. Strand Board) laminated with a layer of aluminum foil which reflects as much as 97% of the radiant energy from the sun back out through the roof. Only a small part of the suns energy penetrates into the attic. The end result is an attic that is up to 30 degrees* cooler.

What kind of plywood do you use for a flat roof?

Most Common Thickness For rafters spaced 20 or more inches apart, 1/2- or 5/8-inch plywood is recommended. The most common rafter spacing is 24 inches, and 5/8-inch plywood is recommended for that. It will support roof loads for most situations and is the standard for most roof applications.

Which plywood is best for roofing?

is the preferred material for roofing. It also performs well when exposed to moisture over long periods of time. The price is low compared to other roofing materials and the installations are also easy.

What is solar Board OSB used for?

Solarbord is a radiant barrier sheathing product for roofs and exterior walls that consists of heat-reflecting foil laminated to OSB. Reduces radiant heat transfer through the roof by up to 97%. Reduces attic temperatures by up to 30ºF. Increases the efficiency of attic duct work.

What is thermostat plywood?

Thermostat® radiant barrier sheathing reflects up to 97% of the sun’s radiant heat from a home’s attic and can help lower attic temperatures by up to 30°F. This improved energy efficiency makes Thermostat radiant barrier the ideal choice for new homes, additions and renovations in warm to hot climates.

Is radiant barrier sheathing worth it?

Radiant barriers work great in hot climates. The hotter it gets, the more benefits a radiant barrier provides. A cooler attic means less stress on the home’s HVAC system and improved attic ductwork efficiency. The more efficient the HVAC operates, the longer the lifespan of the HVAC system.

What is the best material for roof sheathing?

1) Plywood This sheathing option is considered one of the strongest and more durable options. Typically, they come in 4-foot by 8-foot sheets. Rafters and joints that are spaced further apart will require thicker sheets of plywood to prevent roof sagging.

What is roofing sheathing?

Roof decking (or roof sheathing) is the wooden boards that make up the foundation of your entire roof system. I like to say foundation because it’s what your shingles and the rest of your roofing components are installed on. Roof decking is one of the most important pieces of your roof system.

Can you put plywood over plywood on roof?

The new plywood will have to be nailed to the rafters or roof trusses. … But, with the old plywood left in place, it will be considerably more difficult to locate the rafters to ensure proper nail placement.

Article first time published on

What is the minimum thickness of roof sheathing?

Sheathing must be a minimum of 19/32-inch thick. Never affix roof sheathing with staples; 8d ring-shank nails need to be used instead. The normal thickness range for sheathing is 3/8 to 3/4 inch.

What material is used on a flat roof?

A variety of materials can be used to make a flat roof. The most common ones include EPDM rubber, single-ply (TPO, PVC), modified bitumen, built-up roofs (BUR), and spray polyurethane foam.

How much does a sheet of roofing plywood cost?

The thicker the plywood your roofer uses, the more expensive the job will be. Your price could vary depending on how much the roofing company charges for labor, but generally, you can expect to spend between $70 to $100 for each sheet of plywood.

What is RTD plywood used for?

Exterior panels sometimes referred to as RTD sheathing, are designed to hold up to constant moisture. They are completely waterproof and are great for installing in places where you expect consistent exposure to moisture. This RTD sheathing is great for roofs and other outdoor applications.

Can Techshield be used on walls?

On wall use, you will need to still use housewrap over the Tecshield for a vapor barrier because Techshield is just a radiant barrier. Using it on exterior walll does in fact give you added “cooling” benefits.

Which is better insulation or radiant barrier?

While insulation absorbs this heat, a radiant barrier would reflect almost all of it. … All in all, installing both insulation and a radiant barrier will have the strongest and most effective result for your house. But if you must decide between the two, there is likely a clear winner: the radiant barrier.

Is OSB a vapor barrier?

Foil-backed OSB acts as a vapor barrier, particularly when it is cold outside. If water vapor from the interior of the building moves into the attic, and the foil-backed OSB is cooler than the dew point, the moisture may condense on the underside of the barrier.

What is radiant plywood?

Radiant Barrier Plywood – Do It Yourself and Save This radiant barrier plywood is generally used for new roofing applications with the reflective siding facing into the attic space. Felt and shingles are then applied over the top of the roof decking as usual.

How does radiant barrier plywood work?

Radiant barriers and reflective insulation systems work by reducing radiant heat gain. … A radiant barrier reduces the radiant heat transfer from the underside of the roof to the other surfaces in the attic. A radiant barrier works best when it is perpendicular to the radiant energy striking it.

Does radiant barrier affect WIFI?

Does Radiant Barrier affect WIFI or Cell Signals? In general, metal can affect the transmission of radio waves, which is what both cell phones and Wi-Fi systems use for communicating information. … With Wi-Fi signals, unless the radiant barrier is between you and the router, there is unlikely to be any impact.

How long does radiant barrier last?

How Long Does Radiant Barrier Last? According to leading estimates, thousands of homes and properties have had radiant barrier installed for more than ten years without any significant issues.

Can I use radiant barrier sheathing for walls?

Thermostat radiant barrier sheathing can also be used on gables and walls to reduce solar heat gain through these areas. This is especially true for southern exposure exterior surfaces that can absorb heat from prolonged exposure to the sun.

Does radiant barrier work on walls?

A radiant barrier works in walls, too. With a ventilated airspace behind the cladding, as in a rainscreen, if the next layer on the other side of that airspace is a radiant barrier, it could reduce the heat flow.

Can I install radiant barrier under shingles?

You can install the radiant barrier foil below the raised shingles either on top or below the battens. … The easiest and best way is to run the foil out over the roofing felt, tack it down and then install the battens followed by shingles or metal roofing.

What is the difference between sheeting and sheathing?

As nouns the difference between sheathing and sheeting is that sheathing is something that wraps around or surrounds something, as a sheath encases its blade while sheeting is fabric used to make sheets (bedding).

What is the difference between sheathing and decking?

In short, roof decking, also know as roof sheathing, is the foundation of any roof. It is the supporting wood, concrete, steel or other material that the shingles or tiles are placed on. Typically made of wood, concrete, or steel, roof decking is the protective layer that acts as a seal for your home.

What type of wood is used for roof sheathing?

Oriented strand board (OSB) – OSB is the most common type of material used for roof decking. It’s durable and readily available, and has relatively low costs. OSB is made of interwoven strands of wood bonded with adhesive.

Do you need plywood on roof?

Aside from shingles and underlayment, plywood decking is one of the most important components in your roof. The plywood decking is integral in keeping your home free of unwanted water and mold. If the plywood has gotten wet, it can have a disastrous effect on the rest of your roof, especially the shingles.

What is better for roof sheathing OSB or CDX?

CDX and OSB are used for almost similar things, but because they have different features, one is better applied in some tasks and the other one on other tasks. CDX is best for sub-flooring. … OSB also seems to be good for roof sheathing. But take care, it also requires that you use water-resistant coating at the edges.

When should Roof plywood be replaced?

How long does roof plywood last? Roof plywood should last twenty years, so long as it is not exposed to water.

Can you put plywood over rotted wood?

1 Answer. If the old plywood was clean and not infested with dry rot or mold it should be OK to cover it with the new plywood. One thing to consider is that the new plywood probably wants to be the same thickness as what would be used if it was used by itself on the rafters (i.e. if the old plywood had been removed).