A P-Number is an alphanumeric designation assigned to a group of materials. These materials are grouped based on their similar weldability and mechanical characteristics. P-Numbers are assigned to base metals to reduce the number of welding and brazing procedure qualifications required to perform work.

What is P number and group number?

P NumberBase Metal7Ferritic Stainless Steels (Grade 409, 430)8Austenitic Stainless Steels: Group 1 – Grades 304, 316, 317, 347 Group 2 – Grades 309, 310 Group 3 – High Manganese Grades Group 4 – High Molybdenum Grades9A, B, C2 – 4 Nickel Steels10A, B, C, FVarious Low Alloy Steels

What is a P1 material?

ASTM A335 P1 Pipe combines carbon steel with other materials such as aluminum, nickel, or copper to fit the specifications of a project. Carbon (C) the most important constituent of ASTM A335 grade P1 Pipes and ASTM A335 Alloy Steel P1 EFW Pipe. It raises tensile strength, hardness, and resistance to wear and abrasion.

What does P mean in welding?

To reduce the number of welding and brazing procedure qualifications required base metals have been assigned P-Numbers (P mean Parent Metal) by the ASME codes. … These base metals are grouped by material and assigned P Numbers based on what material they are.

Is P number 2062?

Re: IS 2062 – STRUCTURAL STEEL MATERIAL P NUMBER IS 2062 is structural steel used for non-pressure parts such as supports. It is also widely used for API tanks. Grade 350 has no P no and hence is an “Unassigned” material . This grade has good weld-ability and comparable to P1 Gr2 steels.

What P number is Inconel 625?

ASME P# / GROUP#MATERIAL GRADETRADE NAMEP42SB127 400Monel 400P43SB168 600Inconel 600P43SB443 625Inconel 625P43SB575 C276Hastelloy C-276

What is P steel?

Workpiece material groups. … ISO P – Steel is the largest material group, ranging from unalloyed to high-alloyed material and including steel castings and ferritic and martensitic stainless steels. Machinability is usually good, but differs a lot depending on material hardness, carbon content, etc.

What P number is 321 stainless steel?

AlloyCP321.08.045

What P number is Alloy 20?

The P Number of Alloy 20 is 45 according to ASME BPVC Section IX.

Why P number is required?

To reduce the number of welding procedure qualifications that are required, P-Numbers (shortened to P-No) are assigned to base metals according to the characteristics of the material, such as composition, weldability, brazeability and mechanical properties.

Article first time published on

What is the P number for 4130 material?

So, the P number you’re looking for is the one for SA-519 Gr.

What is a no in welding?

A number gives a similar chemical composition in a “as weld” condition. The A number is essential variable in most of welding process in ASME Code Section IX. The Table QW-442 in ASME Code Section IX provides the list of A number. … The filler metal and deposited weld metal have different chemical compositions.

What is P 91 material?

P91 is a chrome moly alloy metal that contains excellent strength and temperature resistance. It is designed for enhanced creep strength, making it a creep strength enhanced ferritic (CSEF). … P91 stands for the metal’s composition of 9% chrome and 1% molybdenum plus vanadium.

What P number is Monel 400?

*The P-Number of base metal Monel 400(UNS N04400) is 42.

What is P1 steel?

SA335 P1 Seamless Pipe, A335 gr P1 Chrome Pipe manufacturer Specification A335 P1 is a seamless ferritic grade Alloy Steel Pipes. … Often, these A335 P1 pipes are known as chrome moly alloy due to the chemical makeup of these pipes including elements such as Molybdenum and Chromium.

What do you mean by number?

A number is a mathematical object used to count, measure, and label. … Numbers can be represented in language with number words. More universally, individual numbers can be represented by symbols, called numerals; for example, “5” is a numeral that represents the number five.

Is 2062 an uns number?

STANDARDWERKSTOFF NR.UNSMS IS 2062 GR.A––

What is brass made of?

brass, alloy of copper and zinc, of historical and enduring importance because of its hardness and workability. The earliest brass, called calamine brass, dates to Neolithic times; it was probably made by reduction of mixtures of zinc ores and copper ores.

What role does Sulphur and phosphorus play in steel?

Phosphorus (P): Phosphorus is usually added with sulphur, to improve machinability. The Phosphorus present in Austenitic stainless steels increases strength. However, it has a detrimental effect on corrosion resistance and increases the tendency of the material to crack during welding.

Why is phosphorus used in steel?

Phosphorus prevents the sticking of light-gage sheets when it is used as an alloy in steel. It strengthens low carbon steel to a degree, increases resistance to corrosion and improves machinability in free-cutting steels.

What P number is Alloy 600?

Inconel Alloy 600 is designated as UNS N06600 with nominal composition of 72Ni-15Cr-8Fe. According to ASME Boiler and Pressure Vessel Code(BPVC) Section IX: Welding and Brazing Qualifications, the welding P-Number of Inconel 600 is 43 and the brazing P-Number of Inconel 600 is 111.

Is Inconel 625 easy to machine?

Nickel & cobalt base corrosion, temperature and wear-resistant alloys, such as Inconel 625, are classified as moderate to difficult when machining, however, it should be emphasized that these alloys can be machined using conventional production methods at satisfactory rates.

What is Inconel 625 used for?

For example, the old favourite INCONEL alloy 625 is used in wire rope, propeller blades, propulsion motors and sheathing for undersea communication cables. Other uses for the INCONEL alloy range include down-hole equipment, platform risers, hangers and high-strength fasteners.

Is Alloy 20 the same as Carpenter 20?

Alloy 20, also known as Carpenter 20, is a nickel-iron-chromium austenitic alloy that was developed for maximum resistance to acid attack, specifically sulfuric acid.

What is alloy 20 made of?

Description. Alloy 20 is a nickel-iron-chromium based, austenitic alloy with excellent corrosion resistance in chemical environments containing sulfuric acid and many other aggressive media. This alloy is stabilized with niobium to resist intergranular corrosion.

What is F6 filler metal?

Once you reach F6; it is a dumping ground for all filler metals used to join ferrous metals. It wasn’t always the case. AWS used different F numbers to differentiate filler metals used with different welding processes.

What is the difference between 321 and 347 stainless steel?

Alloy 347 (UNS S34700) is columbium stabilized austenitic stainless steel plate with good general corrosion resistance and somewhat better resistance in strong oxidizing conditions than 321 (UNS S32100). … Alloy 347H (UNS S3409) stainless steel plate is the higher carbon (0.04 – 0.10) version of the alloy.

What is backing in welding?

Backing is defined as material placed at the root of a weld joint for the purpose of supporting molten weld metal. … Welding the second side of a double-sided butt joint is regarded as welding a joint with backing because the first weld run put in from the second side is supported by weld metal from the first side.

Where is Pwht required?

Current design codes in the pressure vessel and piping industries, such as the BSI and ASME codes, specify that PWHT is required if the thickness of the parts being welded exceeds a specified value, that limit usually depending on the Charpy test properties of the material and the minimum service temperature required.

What is P7 material?

Characteristics and typical fields of application Avesta P7 is a high-alloy Cr-Ni electrode with approx. 40% ferrite offering high tensile strength and excellent resistance to cracking. The chemical composition corresponds to AWS A5. 4 E312.

What is ASME Sec IX?

ASME Section IX Code is set of rules, guidelines, and requirements for Welding, Brazing, and Fusing Qualifications. It is a reference code that helps for BPVC Construction Codes for Qualifications of Welder or Welding Operator, Brazer or Brazing Operator, and Fuser or Fusing Operator.