P-tex is the abbreviated name for Polyethylene. There are 10 major classifications of Polyethylene. For snowboards and skis the form used is UHMWPE or Ultra-high-molecular-weight polyethylene. It’s the same material used to make bullet proof jackets as well as hip and knee replacements.

What is PTEX?

Ptex is a texture mapping system developed by Walt Disney Animation Studios for production-quality rendering: … Ptex applies a separate texture to each face of a subdivision or polygon mesh. The Ptex file format can efficiently store hundreds of thousands of texture images in a single file.

How is PTEX made?

Sintered p-tex is made by packing ultra high molecular weight polyethylene powder into a cake that is heated and compressed (sintered) to form a log or billet (see diagram below). A lathe or mill is then used to shave (scive) off a thin layer to the desired thickness.

Is there a difference between clear and black PTEX?

There’s different grades of Ptex but if you’re just using the standard candle either or will use and being that the board is black the clear will only have a minimal discoloration.

How do you scrape PTEX?

1. Using your propane torch or butane lighter, fire up one tip of the P-Tex candle.
2. Wait until it’s flaming (this may take a couple of minutes). …
3. Move the molten P-Tex candle to the gouge. …
4. Do a second round if necessary then extinguish the flame.
5. Let the P-Tex cool about 15 minutes.

Do scratches on snowboard matter?

Scratches on a snowboard can be an issue, especially if they’re deep. If they are not taken care of, your snowboard can lose its flexibility and be harder to maneuver in snow. A good thing is that you can take some measures to repair the board and maintain it, so the risk of scratches is less.

What are snowboard bases made of?

Polyethylene is the main and often sole ingredient that snowboards bases are made from. The water-repellent, highly porous and abrasion-resistant attributes of the material make it perfect for sliding on snow. Molecular mass and density of the polyethylene determine the performance of the base.

Can you PTEX a sintered base?

Sintered is more expensive because it’s more durable, it glides better and it holds wax better. … All p-tex repairs are done with extruded p-tex because it’s not possible to use sintered p-tex unless you own your own snowboard factory with some very expensive tools.

Is PTEX toxic?

You can also try texturing the inside of the gouge with a file first, this can help the p-tex stick better. Also work somewhere well ventilated because the p-tex smoke is toxic.

Is PTEX porous?

Often referred to by the trade name p-tex, it’s a strong and impact-resistant substance with a low friction coefficient. Because p-tex is porous, almost like a sponge, it can absorb wax time and time again.

Article first time published on

How often should you tune your skis?

In general, it’s good to tune your skis after about every 20 days of riding. Again, however, this varies for every user. If you are the type of skier or snowboarder who tends to beat your skis up a lot more than the average rider, you might need a tune-up more often.

How do you fix a dented snowboard edge?

Bent or missing sections of edge are pretty serious, but can often be fixed. Bent edges can be repaired using careful pressure with a vise and a bit of heat or simply a hammer and chisel or screwdriver, then injecting epoxy into the voids and cracks and clamping.

Are snowboards made out of fiberglass?

Snowboards are made of fibreglass, plastic, steel and wood.

What are Burton boards made of?

Fiberglass makes up two layers of the snowboard with the wood core in the middle. The variations in “the glass” seem infinite when even the direction of the weave affect the ride. Add strands of carbon and things get even more tasty, depending what you like.

What are Burton Snowboards made of?

All of our snowboards are constructed using Super Sap, a plant-based epoxy. We have also eliminated the use of lacquer on snowboards in order to reduce worker and rider exposure to hazardous chemicals.

Can you use a hot glue gun for PTEX?

No HTML is allowed. they do make hot glue gun like tools for ptex, but you cant really use just a hot glue gun as glue sticks melt at a much lower temp so the guns don’t get very hot.

What is a ski core shot?

A core shot is when the core of the ski is exposed to the elements (water, moisture, snow etc..) instead of being protected. … If your skis have taken a blow so gnarly that it has managed to get to the core further steps are needed to make sure it holds.

What kind of wax do you use on a snowboard?

All-temp or universal wax is designed to work well in any temperature or snow conditions. It may be a good choice if the temperature varies a lot where you ride, if you don’t wax your skis that often, or if you ski in different geographical areas during your season and can’t predict what the weather will be like.

How much does it cost to repair a core shot?

A tune with a core shot that large would run folks between $60-$80. It’s a lot of work. If you use p-tex, I recommend a base welder for the repair, which is a hot air gun that you use to melt p-tex. Many old-school ski shops have these.

How do I fix my Coreshot?

1. Clean it up. Cut away hangnails and bulges in the base and avoid slicing straight lines and blunt edges. …
2. Scuff it up. Scuff up the damaged area with sandpaper or a wire brush, then wipe away any debris with a cloth and some base cleaner. …
3. Seal er. …
4. Finish.

Why is the bottom of my snowboard white?

Change at the Base The more the white lines or tiny white hair looking patches are at the base, the dryer the section is. It is an indication that you should wax your snowboard. … Although you do not need to wax at the slightest sign of dryness, the more the white lines appear, the more your board requires a good wax.

Can you sand a snowboard?

Another thing to remember about belt sanding: snowboards are not flat, so don’t even try to grind it or expect to have it ground flat. In some cases you may grind all the way through the base material before the part you want ground even touches the belt.

Can you paint the bottom of a snowboard?

Hold the can of spray paint at least 6 inches away from the board and spray the base color over the entire surface of the snowboard. Keep the can moving in a steady back-and-forth motion so the paint is applied evenly. Additional coats of the base color may be necessary. Let the paint dry between coats.

How much does it cost to repair a snowboard?

TUNING SERVICESALPINE SKISSNOWBOARDSDeluxe Stone Grind Tune Bases wet belted, stone ground and structured, edges sharpened, beveled and polished, p-tex repair and ironed on hot wax and buffed$75n/aExcessive p-tex or delamination repair base welding or “patching”$50 per hour $20 minimumBINDING SERVICES

What kind of epoxy do I need for a snowboard?

Mixing and applying the epoxy G/flex 650 epoxy was ideal for this repair because it remains flexible in the temperature ranges that my board will see in the winter and bonds very well to dissimilar materials. After thoroughly mixing equal parts resin and hardener, I poured the mixture into the syringe.

Is fluoro wax bad for you?

It has been common knowledge in wax rooms for years that prolonged exposure to the fumes from fluorinated wax is harmful, but when used in a well ventilated area along with some form of breathing protection, much like with spray paint and other aerosol products, were generally safe.

Why is fluorocarbon wax bad?

The fastest of these fluorocarbon waxes contains a synthetic fluorine-based compound — perfluorooctanoic acid or PFOA. PFOAs are “bad for the environment.” They can contaminate drinking water and soils and have been linked with cancer, liver damage, birth defects, hypertension and strokes.

Why are fluoro waxes banned?

Fluorinated wax, and the raw perfluorooctanoic acid (PFOA) compounds that make up these wax products, have been scientifically studied for their negative environmental and health impacts. … In July 2020 the European Chemicals Agency banned the sale, manufacture, and import of all products containing PFOAs.