Long Arm Hex Key Wrench Set offers the most common Star hex wrench sizes to remove and install most star screws found in cars, furniture, equipment, and more. The versatile long arm/short arm design offers extra reach on one end, and extra leverage on the other.

What are star wrenches?

Long Arm Hex Key Wrench Set offers the most common Star hex wrench sizes to remove and install most star screws found in cars, furniture, equipment, and more. The versatile long arm/short arm design offers extra reach on one end, and extra leverage on the other.

Is Torx and Allen wrench the same?

No, they are two very different tools. The Allen wrench or hex key, as it is sometimes called, is a hexagon shape, that is why many refer to them as hex keys. The Torx key has a star shape. So if you are trying to use an Allen wrench on a Torx screw, it won’t work, and vise versa.

Are star and hex the same?

Hexagon keys are also known by several other names including hex key, hex wrench, Allen key, and Allen wrench. … The generic name given to Torx fasteners and keys by the ISO is hexalobular, although virtually no one uses this name. Instead they will more commonly be referred to by the generic terms “star” or “six-point”.

What is Torx key?

Torx keys are also commonly known as star keys. Like hexagon allen keys, most torx keys are small enough to be carried in a pocket and enable the user to drive the appropriate fasteners without needing a separate screwdriver or power tool.

What are Torx screwdrivers used for?

Torx screws are typically used in vehicles, motorcycles, bicycles, computer systems, hard disk drives and consumer electronics. The unusual star-shaped head makes them far more secure than regular flat-head or cross-head screws and allows higher torque transmission so screws and bolts can be tightened more securely.

Is Torx better than Philips?

Category \ Head:PhillipsTorxmax torquelowerhighercenteringexcellentgoodoverload behaviorcam-outbit/screw failergonomicsaverageexcellent

Is a hex wrench an Allen wrench?

Allen wrenches, which are also called hex-key wrenches or hex keys, have a hexagonal cross section to fit various machine screws and set screws that have hexagonal-shaped recessed holes.

Is an Allen wrench a hex key?

What are hex keys? Hex keys, commonly known as Allen keys/wrenches in the UK and various other countries, are a very simple hand tool of the general spanner and socket family, used for tightening and loosening hexagonal bolts and other compatible fasteners.

What is a t30 driver?

For use with common torx head style screws and anchors and screws. …

Article first time published on

What is a TX bit?

Torx (pronounced /tɔːrks/) is a trademark for a type of screw drive characterized by a 6-point star-shaped pattern, developed in 1967 by Camcar Textron. A popular generic name for the drive is star, as in star screwdriver or star bits. … Torx screws are also becoming increasingly popular in construction industries.

Are torx screws metric or SAE?

there are the standard torx, and there is such a thing as a torx plus. I have both. As others have said there are no English or Metric Torx just Torx. The 1/4″ & 3/8″ drive ones are the “security” ones with a hole in the end of the bit to fit over a knob in the Torx fastener.

What is the hexagon tool called?

An Allen key or Allen wrench is also known as Hex key. This is a small handheld tool used for turning bolts and screws which have hexagonal sockets.

How do you remove a Torx screw without a screwdriver?

Try a plastic toothbrush. Take a plastic toothbrush and lightly melt the end using a lighter or other source of heat. Once the plastic is soft you can insert it in the head of the screw and allow the plastic to harden once more. Once it is hard try to turn the screw counterclockwise to unscrew it.

What can I use instead of a Torx screwdriver?

• Use a plastic toothbrush. Similar to its use on both Phillips and flat head screws, a plastic toothbrush can also be used to remove a Torx screw. …
• Use a small flat head screwdriver. …
• Break out the pin for security Torx screws.

How do you measure a Torx screw?

1. Line up the ruler on the star-shaped screw tip to measure from one point to the point directly opposite.
2. Examine the markings on the ruler and write them down.

Why do star screws exist?

Star drives / screws or Torx as they are commonly known are often used in situations where a certain amount of security or tamper resistance is desired and because of the make up of the star allows a bit more torque than a Phillips and a lot more than a Slotted.

Which is better Torx or square?

The square drive provides a more positive bit engagement making it harder for the heads to strip out. Most other types of deck screws use a Philips head or a variation of a Philips type drive and some use a Torx style bit drive. … Using an impact driver also helps to drive screws without stripping the heads.

What does GRK screws stand for?

oK – stupid question – whats GRK stand for? Green River Killer. BUIC Sep 01, 2007 02:55pm #16. GRK is a brand of high quality screws.

Who invented Torx screws?

The development of the Torx screw began in 1967, was patented in 1971 and was invented by Bernard F. Reiland for the then Camcar Textron company.

What is a star bolt?

What are Star Bolts? You may have noticed metal stars or star bolts on buildings in the Philadelphia area. These stars are not decoration but are actually the protruding ends of objects called tie rods. The rods are used to secure brick walls to the floor support beams in some Philadelphia row homes.

What is a Torx screwdriver or socket?

(tôrks) A trademark for a screw with a head having a socket shaped like a six-pointed star and for a screwdriver with a tip that fits it.

What is the L tool called?

So what is an Allen wrench you may ask? Alright, we’ll finally tell you. It’s the L-shaped tool that takes the form of a hexagonal key. Allen wrenches are used to fasten hex screws into wood, metal, and even plastic.

Why do some technicians use Allen keys?

Why do some technicians use Allen keys instead of self-tapping screws to fasten joint? … To summarize, a hex key is a tool having a hexagonal socket that is used to drive nuts and screws. They are easier to use and less prone to strip than their Phillip’s head equivalent since they have six driving points.

Why do allen wrenches exist?

The primary advantage of Allen bolts over hex bolts is that the tool used to do them up can be smaller than the head itself. So they are perfect for if you have a bolt that’s down inside a narrow opening. You can stick the Allen key down into the hole and do up the bolt.

Is it alum key or Allen key?

A hex key, also known as an Allen key or Allen wrench, is a small handheld tool that’s used for for driving bolts and screws with a hexagonal socket. They are available in many different sizes, though they all have the same hexagonal-shaped tip.

What is SAE vs metric?

Tool measurements are either “Metric” or “Standard.” The latter refers to SAE tools. SAE tools are measured in 1/1000 of an inch. Metric tools are measured by the metric system. The “mm” listed on metric tools refers to millimeters.

What are Ball drivers?

Overview. Balldriver® Allen Wrenches are made from high torque steel, each with a hardened ball tip for angled entry. Available with a screwdriver handle for comfort and sold individually or as a set, all your standard laboratory needs for allen wrenches can be met.

What size is a T6 Torx?

SizeInch P to PMetric P to PT5.055″1.42 mmT6.066″1.70 mmT7.078″1.99 mmT8.090″2.31 mm

What is a T30 Torx driver?

This durably constructed 3/8-in Drive T30 Torx Bit Socket provides the end user the ability to use a ratchet or driver on Torx fasteners. … Torx® is a trademark of Acument Intellectual Properties, LLC.

What is a T30 Torx bit?

Drive T30 Torx Bit Socket provides the end user to use a ratchet or driver on Torx fasteners. Adding these to your tool box will allows you to never get caught without the right tool for the job. Torx® is a trademark of Acument Intellectual Properties, LLC.