A. DRYLOK® Protector Clear Low Sheen Penetrating Sealer has a curing compound and can be used on new concrete or old concrete to control dusting. It is a water sealer. DRYLOK® Floor & Wall Masonry Waterproofer stops water from coming up through the concrete floors.

Does Drylok come in different colors?

DRYLOK® Original Masonry Waterproofer’s sandy finish is available in 4 ready-mixed colors (blue, white, gray, and beige) and 6 tints (buttercup, mint green, platinum, sand, slate blue, and soft pink).

How many coats of Drylok should I do?

Just as with a thorough paint job, proper application of DRYLOK Masonry Waterproofer requires two coats. Dry times vary based on temperature and humidity, but it typically takes at least four hours for the product to dry.

What is the difference between Drylok extreme and Drylok pro?

DRYLOK Pro is an exclusive product offered through Lowe’s. DRYLOK Pro offers mold and mildew resistance, stops water under hydrostatic pressure and water entering by wind driven rain. … The color selection is more extensive than that of DRYLOK Extreme. DRYLOK Pro was formulated to accept a larger spectrum of color.

Is Drylock good for basement walls?

Drylok is a product that is used to stop water seepage on interior masonry walls. It is supposed to seal basement foundations, primarily block foundations but I’ve seen it on concrete as well. Of course, the reason you need to seal any basement foundation is because the foundation is porous.

How long does DRYLOK need to dry before rain?

Surfaces subjected to hydrostatic pressure should be treated with DRYLOK® Masonry Waterproofer. Not for use on asphalt surfaces. DRY TIME: To touch: 1 hour • To recoat: 6 hours • Heavy traffic: 24 hours • Rain free: 24 hours Note: Drying time may be affected by temperature, humidity and film thickness.

How do I prepare my basement for DRYLOK?

DRYLOK paint should only be applied after you prep walls by cleaning them with a wire brush, removing salt deposits and sealing cracks and holes. Paint the walls when the temperature is at least 50 degrees Fahrenheit, optimally during a rain-free period when humidity levels are not high.

How many sq ft does a 5 gallon bucket of Drylok cover?

5 gallon can. Coverage 375-500 Sq.Ft.

Can you paint DRYLOK extreme?

Absolutely. In fact, DRYLOK makes an ideal base coat. After applying DRYLOK, wait at least 24 hours and then paint it with a good quality latex top coat.

Is Drylok low odor?

DRYLOK Latex Base Masonry Waterproofed is a low-odor waterproofing paint formulated to protect any interior, exterior, above- or below-grade masonry surface.

Article first time published on

How do you use Drylok extreme?

If brushed, work the DRYLOK® Extreme Concrete & Masonry Waterproofer into the pores of the masonry, making sure to fill all pores and pinholes (see IMPORTANT). APPLY TWO COATS. Allow to dry 2 hours between coats. The second and subsequent coats may be applied by roller, brush, or spray.

Can you apply Drylok with a roller?

Do not thin DRYLOK® Extreme Masonry waterproofer before and during application. To apply the first coat to bare masonry, use a three-quarter-inch nap roller, a DRYLOK® brush or a quality nylon bristle brush.

Can you paint Drylok fast plug?

DRYLOK® Fast Plug® may be painted when set with DRYLOK® Original Basement & Masonry Waterproofer, DRYLOK® Powdered Basement & Masonry Waterproofer or DRYLOK® Concrete Floor Paint. For Inactive Leaks, Patching, Anchoring: Thoroughly soak the area to be patched.

Can Drylok be used on wet walls?

DRYLOK® Extreme Masonry Waterproofer may be applied on a slightly damp surface, but best results are obtained when the surface is dry, clean and free of grease, oil, form-release compound, and paint. … Patch all cracks and holes with DRYLOK® Fast Plug®. Wet the surface to be patched.

What is better than Drylok?

ft. per gallon of coverage, Sani-Tred can waterproof larger surfaces using less material and lowering your costs. Not only does Sani-Tred actually waterproof your basement, it has better coverage for less money in the long run. Drylok appears to be the more economical choice.

Does Drylok paint really work?

Yes, Drylok paint really does work. In fact, if you need paint that will be waterproof then this is the perfect choice. Before you start painting you will have to ensure that the wall isn’t too wet, otherwise this will impact the effectiveness of the paint.

What is the best waterproofing paint for concrete?

• Aqua-X Concrete Sealer.
• Kilz Interior/Exterior Basement And Masonry Waterproofing Paint.
• Rust Bullet Duragrade.
• Drylok.
• KILZ Interior/Exterior Self-Priming Masonry, Stucco, and Brick Flat Paint.
• Eco Advance EACON16CON Waterproofer.
• Rust-Oleum 261845 EpoxyShield Garage Floor Coating.

Can you seal basement walls from the inside?

Apply a masonry waterproofing product to the walls Seal/coat the interior of the walls with a suitable masonry waterproof product. When the paint dries, the sealant forms a watertight bond to stop water from seeping through. This is how you can waterproof your basement walls from inside.

Does Drylok reduce humidity?

DRYLOK® Extreme Masonry Waterproofer. … DRYLOK® Extreme Masonry Waterproofer is a product that you can use to help reduce moisture from your foundation walls from making your basement into a humid jungle atmosphere.

Is Drylok good for basement floors?

According to the manufacturer, Drylok can be used on garage floors, basement floors, brick patios, poured concrete and block patios, and wood steps. It can be used to prolong the life of and beautify these surfaces.

How long does it take Drylok Pro to dry?

Allow to dry 2 hours between coats. The second and subsequent coats may be applied by roller, brush, or sprayer. When painting the inside of concrete swimming pools allow DRYLOK® PRO Basement & Masonry Waterproofer to dry at least one week before putting into service.

Can you paint Drylok over drywall?

DRYLOK readily accepts latex or acrylic paints once the DRYLOK itself is dry. It can be used as a base coat or primer for other paints, for instance, if you prefer a shade not available in any of the DRYLOK products. Wait at least 24 hours before painting over fresh DRYLOK, as this allows for ample drying time.

Can you Drylok over kilz?

Can DRYLOK® Masonry Waterproofer be used over paint? A. Yes and no. DRYLOK® may be used over any other cementitious-type waterproofing paint in good, repaintable condition, either inside or outside.

Can you paint Drylok over mold?

While Drylok is designed to prevent water from penetrating through foundation walls, it will not remove existing mold or mildew. Simply ignoring the problem and painting straight over it is not recommended as it can only prevent further fungus from growing.

How much does a 5 gallon bucket of Drylok weigh?

MaterialWater BasedBrandDrylokColorWhiteItem Weight66 PoundsItem Dimensions LxWxH12 x 12 x 15 inches

Does Drylok extreme smell?

A new latex-based waterproofer from the manufacturers of Drylok, one of the best-known basement-wall paints, eliminates much of the odor while retaining Drylok’s sealing ability. Odor is important to consider because basement walls generally are sealed from the inside and ventilation frequently is poor.

How much does it cost to Drylok a basement?

The cost of using DRYLOK to seal a basement averages $0.60 to $1 a square foot. DRYLOK is a basement sealant material. It is a type of waterproof paint you can roll on yourself. It can cover your floors, walls, or both.

Can I use a paint sprayer with Drylok?

It is possible to spray drylok, but not with a light duty airless or a homeowner. You need to remove the filters even after you have used a stout pump like the Graco 733. As soon as the paint is sprayed, it needs to be rolled back to work the pores into it.

How long does drylok cement take to dry?

Mix only enough for immediate use, because DRYLOK Fast Plug sets in 3-5 minutes. Cannot be reworked once it has set. SET TIME: 3-5 minutes Note: Maximum cure and dry time will be prolonged when slightly humid and when damp, cool conditions prevail.

How long does it take for hydraulic cement to fully cure?

Allow concrete to fully cure for 28 days before use of this product. This material is not intended for use as a horizontal wearing surface. Setting time will speed up in hot weather and slow in cold weather.

Can you mix acrylic paint with drylok?

Registered. yup. just mix in plain old acrylic paint with the drylok in small portions. It can be a really versatile way to coat different things for vivariums.