To keep your vice in tip-top condition, always keep all threaded and moving parts clean by wiping the vice with a cloth after each use. This will clear any grit, dirt and debris from building up on the vice. Make sure to oil and lubricate the joints, threaded parts, and sliding section often.

How do you take care of a bench vise?

Keep the workpiece in the vise close as possible to the jaws to prevent vibration when sawing, filing, etc. Support the end of extra long work with an adjustable stand, saw horse, or box rather than putting extra strain on the vise. Keep all threaded and moving parts clean, oiled and free of chips and dirt.

What are the main parts of a bench vice?

The main components of modified bench vise are fixed jaw, movable jaw, lead screw with handle, c-clamp, clamping handle, nut and bolt. The fixed jaw is fixed to the c-clamp with base with the help of nut and bolt. A lead screw is fit between movable jaw and fixed jaw to control the movement of movable jaw.

Is way oil hydraulic oil?

Way oil, or way lube, is a type of hydraulic oil. Hydraulic oils can have additives mixed in, such as tackifiers, to make the way oil stick to surfaces. The tackifier additive in way oil is ideal for vertical machine parts such as slideway systems. Friction in the machining process requires special attention.

What are the different parts of a bench vice?

• The Base. The base of the vise is the part that holds everything together. …
• The Jaw. This is where everything stays. …
• The Slide. This part moves when the handle is turned, applying pressure to the object. …
• Main Screw. …
• Handle. …
• The Anvil. …
• Serrated Jaws. …
• Pipe Jaws.

What is the reason for damage spindle in bench vice?

Explanation: The movable jaw of a bench vice is not moving even though the spindle is turned. It is due to the reason that spindle pin is broken.

When not in use a bench vise should be left with?

46. Bench vises not in use should be left loose with the handle in a vertical orientation. This will prevent injury to those walking past the workbench.

What is machine oil?

Machine oil is designed to protect the metal surfaces and lubricate the moving parts of sewing machines and sergers. It is a mix of various petrochemicals extracted from petroleum oil. Sometimes machine oil is made from alternative natural substitute chemicals, such as low viscosity hydro-treated paraffinic oil.

What are Wilton vises made of?

Material60,000 PSI tensile ductile ironBrandWiltonItem Dimensions LxWxH14 x 7 x 8 inchesColorSee PhotoStyleTradesman Vise

What viscosity is way oil?

ISO Designation of way lubricants The common viscosity range of way lubricants is 32 cSt to 220 cSt.

Article first time published on

What is cutting oil used for?

Cutting oil is designed to maximise the life of cutting and drilling equipment; working under extreme pressure, improving performance and extending the life of tools. Cutting oil improves machine finish, lubricates to reduce tip welding and prevents pitting and metal seizures.

Why soft jaws are used in vice?

It is often a problem when working, that the hardened steel serrated jaws on the Bench Vice will mark the surface of the piece. This is especially a problem when working on soft materials. To prevent this problem occuring Soft Jaws are used. Soft Jaws fit over the jaws of the Bench Vice and are made of a soft material.

What are the different types of vises?

• Bench Vice.
• Simple Bench Vice.
• Swivel Base Bench Vice.
• Quick Release Vice.
• Combination Vice.
• Machine Vice. Plain Machine Vice. Flange Machine Vice. Swivel Machine Vice. Universal Machine Vice. Vertical Machine Vice.
• Pipe Vice.
• Leg Vice.

How do you remove a vice handle?

Just grind the lump off the end to get out. then bend straight in a big vice. A bit of suitable pipe welded or pinned will stop it coming out again. The slightly shortened handle will stop you bending it again.

What is the handle on a vice called?

The handle can also be known as the tommy bar. This is due to slang that has derived from the First World War when British soldiers were referred to as “Tommies” and a tommy bar was the name given to a spanner used to assemble and disassemble grenade bombs.

What is leg vice?

Leg Vice. The Blacksmiths’ Leg Vice (aka Post Vice) firmly holds hot iron while it is hammered, chiseled or twisted. A normal Engineers Vice may shatter after such treatment because of the brittle nature of Cast iron from which they are made – although Malleable Iron is more resistant.

What clamping position should be considered when mounting a vise on a workbench?

What clamping position should be considered when mounting a vise on a workbench? The vise should be positioned so that a long piece can be held vertically in the jaws without interference from the workbench.

What makes a good top for a workbench?

In this case a sheet of 3/4-inch medium density fiberboard (MDF) is ideal. It is stout enough to hold any load, has a smooth surface that won’t scratch wood and can be easily flipped or replaced once the table top is too nicked up to work on. Add a coat of beeswax for a finish that will repel stains and paint.

What is the material to manufacture bench vice?

An engineer’s vise, also known as a metalworking vise, machinist’s vise, or, informally, a “bench vise”, is used to clamp metal instead of wood. It is used to hold metal when filing or cutting. It is sometimes made of cast steel or malleable cast iron, but most are made of cast iron.