A litre of Osmo Polyx Oil will cover about 24 square metres per coating. Calculate the area that you need to finish using this guide – it is not advisable to dilute this product. Using too much will delay drying and may result in performance and aesthetic problems that are hard to resolve.

Can white spirit thin Osmo oil?

but white spirit will work fine just be sure to rag it off with a lint free cloth and you should be able to get 2 coats on in a day .

Can you thin Osmo Wood Wax?

Osmo Wood Wax Finish Clear Extra Thin is ready to use. Do not thin. Stir well with a flat stirring stick or spatula before use.

Can you apply Osmo oil with a cloth?

Cloth Application Apply thinly with a clean lint-free cloth onto a clean, dry and smooth surface. Work it in slight circular motions along the grain. Once you’ve wiped on a thin layer, use a dry cloth and wipe off in the direction of the grain to avoid streaks.

Should you buff Osmo oil?

When thoroughly dry, surface can be buffed or polished with hand polisher or buffing machine. The only difference in applying the Clear Extra Thin is to let it sit for 30 minutes before wiping away any excess.

Does Osmo oil make wood darker?

A clear oil such as Osmo Polyx Oil will maintain the natural appearance, but will darken the wood again, much like when you wipe water over bare wood, it will enhance and enrich the woods natural tones.

Should you sand between coats of Osmo?

Sanding is not necessary between coats. However, de-nibbing with a pad may help to reduce any imperfections from the surface between each coat.

How do you apply Osmo thins?

1. Stir Osmo Wood Wax Finish thoroughly before and periodically during application.
2. Apply the 1st coat thinly and evenly along the grain with an Osmo Soft Tip Brush or lint-free cotton cloth.
3. Allow to dry for 30 minutes, then remove any surplus oil with a clean cloth.

How often should you apply Osmo oil?

For high traffic areas in restaurants and shops, Osmo Maintenance Oil should be used every other month or more depending on the amount of use. The protective surface can be renewed when the floor starts to show signs of wear. This can be done at any time without needing to sand the old finish.

How long does Osmo top oil take to dry?

Allow to dry for approx. 8-10 hours. Ventilate well while drying. Apply the second coat with an Osmo Oil Finish Applicator Fleece or a lint-free cloth.

Article first time published on

How many coats of Osmo do I need?

For roller or brush applications; a maximum of two coats is recommended. Our finishes are designed to penetrate into the wood, application of a third coat is unlikely to absorb. For cloth applications; three or four coats is recommended.

Can you put Poly over Osmo?

If you have applied coats of polyurethane already of a different brand, can you put the osmo on as a top coat? Answer: No. … To use Polyx-Oil on your wood, you will need to sand the polyurethane completely off.

Is Osmo oil Hard wearing?

Osmo Polyx®-Oils are developed from natural oils and waxes to provide the most hardwearing and durable protection for wooden flooring and furniture.

Can you put wax over Osmo oil?

Wax on Oil is possible, if the oil is dry, as the wax can be buffed to a shine. It would be best with Sand and Oil only, but check with the application instruction and experiment in a small out of sight area.

Is Osmo a drying oil?

Osmo Polyx®-Oil 2K (6125) has a special curing time of 4 hours, which means the floor can be used as normal after this time. However, the other Polyx®-Oils have a drying time of 8-12 hours and a full curing time of approx.

How do you clean brushes after using Osmo oil?

Brushes and rollers should be cleaned with Osmo Brush Cleaner and then rinsed with warm water. Cleaning oils out of the fibres and bristles uses a substantial amount of water or solvent.

Can you apply Osmo over stain?

It worked fine, just make sure that the stain is well dried before applying the osmo. 2 of 2 found this helpful.

Is Osmo oil the best?

Osmo is probably the best worktop oil on the market, certainly out of the products I’ve used. You’ll find it relatively easy to use and the finish is stunning.

Can Osmo top oil be used outside?

RECOMMENDED USE Osmo UV-Protection-Oil is ideal for all vertical wood surfaces in outdoor areas: doors, windows, window shutters (dimensionally stable elements), carports, timber cladding, balconies, fences, pergolas, and summer houses (dimensionally unstable elements).

Can you brush on Osmo oil?

With no need for thinning (Osmo Polyx Oil is supplied ready to use) all you need to do is stir the pot well and you can begin application. Apply the oil with a firm and fine bristle brush, dip it into the paint being careful not to overfill it and then brush it evenly along the wood grain.

How long does Osmo UV last?

NOTE Depending on the degree of weathering, apply one coat of Osmo UV-Protection-Oil Tints to the cleaned and intact finish after approx. 3-4 years. For areas exposed to strong weathering, such as weatherboard, post caps or window sills, please expect significantly shorter renovation intervals.

How long does Osmo polyx take to dry?

Allow to dry for approx. 8-10 hours under good ven- tilation. After drying, quickly apply a second coat also thinly. When renovating or recoating an already oiled sur- face, one coat applied to the clean and dry surface is usually sufficient.

How do I speed up Osmo drying time?

Conditions. The area of application must be well ventilated and in dry conditions. The ideal temperature for application is 23°C with 50% relative humidity. Lower temperatures and/or higher air humidity can increase drying times.

Is Osmo finish durable?

Osmo Polyx-Oil is all those things. Made from natural vegetable oils and waxes, it does not off-gas or smell bad. It’s durable, easy to apply, and easy to repair. The secret to success with this oil is filling the pores first.

Can you wax over Osmo polyx?

Osmo Polyx Oil is the original hard wax oil a combination of natural oils and waxes for use on almost any interior project. Hard Wax Oil is almost as hard as a varnish but easier to repair. All you need is a rag apply the oil over the affected areas without having to remove any previous finish.

Is it better to oil or wax wood?

Wax gets dull over time and needs to be reapplied very often, so it is not a good choice for furniture overall. If you are talking about wooden objects that you keep in your home on display, then wax is a good choice. For outdoor wooden objects, oil would be the best finish since it is much more resistant to heat.

What is Danish oil?

Danish oil is typically made from blends of Linseed oil and/or Tung oil, mineral spirits, synthetic resins and varnish to make it durable and easy to work with. Rustins Danish oil however is considered to be the ‘original’ formula.

Can you paint over hardwax oil?

Painting over waxed wood generally isn’t recommended. Unlike paint or clear finish, wax — even super-hard carnauba wax — never completely cures. The solvents in oil paint will soften it, leaving a tacky finish, and wax prevents water-based varnishes from bonding to the wood surface, causing eventual peeling.

Why is my oiled worktop sticky?

Danish oil can also become sticky if applied incorrectly, at the wrong rate. … If it is an old can, the oil may turn tacky so it is best to buy fresh oil if you are unsure. To remove the sticky oil patch, wet a cloth with white spirits and, using a circular motion, wipe it over the worktop a small area at a time.

Is Osmo dry hard?

How long does Osmo Polyx Hardwax-Oil take to dry? After applying the first coat of Osmo Polyx Oil with good ventilation it will take 8-10 hours to dry.

Does Osmo oil need 2 coats?

OSMO Hardwax Oil requires two coats. The second coat should be applied after the first coat is thoroughly dry. … coat until the surface is evenly dull.